BASIS

Anti-corrosive additives dissolved in low-odor solvents with high affinity for metal and extremely good water displacement effect.
ACMOSIN 51-18 is barium-free.
 

PROPERTIES

ACMOSIN 51-18 is a dewatering and anti-corrosive agent for parts, which are supplied wet from production and are to be dried without thermal effects, e.g. during grinding or burnishing, in the hardening shop, electroplating plant, etc. Suitable for storage indoors and outdoors.
ACMOSIN 51-18 is highly fluid and runs off the parts without leaving substantial residues. A thin oily film with an extremely good protective effect forms after a short storage time.
 

APPLICATION

Place workpieces with a strainer basket in ACMOSIN 51-18 for a short time or swing to and fro briefly. Adhering water is displaced from the surface, sinks to the bottom and can be drained from the dip tank from time to time.
 

SUPPLY FORM

Non-returnable drums with net contents of

5 kg,
20 kg
and 160 kg.

Additional information can be found in the EU safety data sheet.
Our technical service department will gladly advise you on all questions concerning the application of our products. Free samples can be made available to you on request.