|
PROPERTIES
The use of easy-care water-miscible coolant/lubricants has greatly facilitated the task of cleaning machines
and vessels. Nevertheless, if these vessels contain very old solutions or obnoxious-smelling discoloured
emulsions, the cleaning operation continues to be highly unpopular and therefore tends to be skimped. As a
result, germ-laden residues of the old working solution remain in the vessels, where they provide a source of
infection. These residues rapidly contaminate the fresh coolant emulsion poured in, so that this, too, has to
be changed.
The use of ACMOSOL 133-30 multi-functional system cleaning agent is a major step towards making the
cleaning operation quicker, simpler and more reliable. What is more, the replacement coolant solution
keeps longer. As a rule this means an enormous cost saving.
APPLICATION
If coolant tanks on individual machines or in centralized cooling systems have to be cleaned, some 1%
ACMOSOL 133-30 is added to the working solution on the day before the cleaning operation. Normal
working is then resumed. The good wetting action of the system cleaning agent thoroughly flushes through
the piping and dead corners, while this bactericidal action destroys any accumulations of bacteria. Usually
the disagreeable odour of putrefied coolant emulsions is also eliminated quite rapidly.
On the following day, when the stock tank has been cleaned, the machine is flushed through thoroughly with
clean water and immediately afterwards filled with fresh working emulsion.
ACMOSOL 133-30 combines the actions of a cleaning agent, anticorrosive and biocide.
ADDITIONAL NOTES
Biocides have to be used cautiously and carefully. Always notice special labelling and safety data
sheet before use.
SUPPLY FORM
Disposable containers holding
1 kg,
5 kg
and 20 kg net.
Additional information can be found in the EU safety data sheet.
Our technical service department will gladly advise you on all questions concerning the application of our products. Free samples can be made available to you on request.
|
