BASIS

ACMOSIT 64-200 contains mineral oil, special emulsifiers, wetting agents, anti-corrosion additives and an extreme pressure (EP) additive. Guaranteed free from nitrate, organo-chlorine compounds and nitrostable amines.
ACMOSIT 64-200 contains a special inhibitor to prevent nitrosamine formation. It is consequently not essential to change the working emulsion if the limit value for nitrite is exceeded.
 

PROPERTIES

ACMOSIT 64-200 is highly suitable for turning, drilling and milling of steel, high-grade steel, grey cast iron and light metals. ACMOSIT 64-200 provides particularly good protection against corrosion.
ACMOSIT 64-200 guarantees extremely long periods of use without odour formation and without decomposition. Hence the calculation is particularly favourable. The heat dissipation and lubricating effect of the working emulsion are outstanding, leading to excellent cutting performance and long tool lives.
When used in particular in high-speed cutting machines and at high pressure, the ACMOSIT 64-200 cooling lubricant remains stable.
When changing to another cooling lubricant, cleaning should first be carried out with our ACMOSOL 133-30 system cleaner (see special leaflet).
 

APPLICATION

Mix approx. 3-5% ACMOSIT 64-200 in water. Do not use less than 5% for grey cast iron.
 

SUPPLY FORM

Non-returnable drums containing

5 kg,
20 kg
and 180 kg net weight.

Additional information can be found in the EU safety data sheet.
Our technical service department will gladly advise you on all questions concerning the application of our products. Free samples can be made available to you on request.